home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
HAM_RAD
/
3175.ZIP
/
KENWOOD3.ZIP
/
TS790.2
< prev
next >
Wrap
Text File
|
1990-11-03
|
1KB
|
27 lines
ts790.2
OPERATING PROCEDURES
The repeater cross band operation allows the TS790A to receive on one
bag signals
will automatically be switched to the sub band.The TS790A will then
re-transmit the signals from the main band. Each band may contain
offset and sub-audible tone information (an optional TSU-5 must be
installed in EACH BAND for decode).
1 Press the MAIN function swich to select the MAIN band.
2 Select the first operating frequency and mode (fm only).Select the
offset as required.
3 If the CH.Q is on,press the CH.Q switch to turn the function off.
4 Select the sub-audible tone as required .
5 Transfer the contents of the MAIN band to the SUB band.
6 Select the second operating frequency anf mode (FM ONLY) and turn
the CH.Q off.
7 Select the offset and sub-audible tone as required.
8 Adjustd
point.The TS790A will transmit in the repeater crossband mode if
the squelch controls are set too low or a signal is received.
continued in ts790.3